Static Virtual LANs (VLANs)

Configuring VLANs

Status:

Port-Based: Port-Based, static VLAN

Protocol: Protocol-Based, static VLAN

Dynamic: Port-Based, temporary VLAN learned through

GVRP (Refer to chapter 3, “GVRP” .)

Voice: Indicates whether a (port-based) VLAN is configured as a voice VLAN. Refer to “Voice VLANs” on page 2-54.

Jumbo: Indicates whether a VLAN is configured for Jumbo packets. For more on jumbos, refer to the chapter titled “Port Traffic Controls” in the Management and Configuration Guide for your switch.

For example:

When GVRP is disabled (the default), Dynamic VLANs do not exist on the switch and do not appear in this listing. (Refer to chapter 3, “GVRP” .)

Figure 2-18. Example of “Show VLAN” Listing (GVRP Enabled)Displaying the VLAN Membership of One or More Ports.

This command shows to which VLAN a port belongs.

Syntax: show vlan ports < port-list> [detail]

Displays VLAN information for an individual port or a group of ports, either cumulatively or on a detailed per-port basis.

port-list:Specify a single port number, a range of ports (for example, a1-a16), or all.

detail: Displays detailed VLAN membership information on a per- port basis.

2-29