GVRP
Configuring GVRP On a Switch
Syntax: interface <
Changes the Unknown VLAN field setting for the specified port(s).
For example, to change and view the configuration for ports
ProCurve (config)# interface
ProCurve (config)# show gvrp
GVRP support
Maximum VLANs to support [8] : 8
Primary VLAN : DEFAULT_VLAN
GVRP Enabled [No] : Yes
Port | Type | Unknown VLAN | |
D1 | 1000X | Block | |
D2 | 1000X | Block | |
. | . | . | |
. | . | . | |
. | . | . | |
X2 |
| Learn | |
C1 | Learn |
Syntax: show vlans
The show vlans command lists all VLANs present in the switch.
For example, in the following illustration, switch “B” has one static VLAN (the default VLAN), with GVRP enabled and port 1 configured to Learn for Unknown VLANs. Switch “A” has GVRP enabled and has three static VLANs: the default VLAN,