Manuals / Brands / Baby / Model Vehicle / HP / Baby / Model Vehicle

HP Model Vehicle 6120 VLAN, GVRP, Name:, Mode:, Voice:, Jumbo:, detail, Status:, VLAN ID:, Dynamic:, Protocol:, Port name:, Port-Based

1 222

Download 222 pages, 1.14 Mb

Static Virtual LANs (VLANs)

Configuring VLANs

Descriptions of items displayed by the command are provided below.

Port name: The user-specified port name, if one has been assigned.

VLAN ID: The VLAN identification number, or VID.

Name: The default or specified name assigned to the VLAN. For

astatic VLAN, the default name consists of VLAN-xwhere “x” matches the VID assigned to that VLAN. For a dynamic VLAN, the name consists of GVRP_x where “x” matches the applicable VID.

Status:

Port-Based: Port-Based, static VLAN

Protocol: Protocol-Based, static VLAN

Dynamic: Port-Based, temporary VLAN learned through

GVRP.

Voice: Indicates whether a (port-based) VLAN is configured as a voice VLAN.

Jumbo: Indicates whether a VLAN is configured for Jumbo packets. For more on jumbos, refer to the chapter titled “Port Traffic Controls” in the Management and Configuration Guide for your switch.

Mode: Indicates whether a VLAN is tagged or untagged.

Figure 2-19is an example of the output when the detail option is not used.

ProCurve# show vlan ports a1-a33

Status and Counters - VLAN Information - for ports a1-a33

Figure 2-19. Example of “Show VLAN Ports” Cumulative Listing

2-30

Contents

Page Page Page Product Documentation 1 Getting Started 2 Static Virtual LANs (VLANs) Terminology General Steps for Using VLANs 802.1Q VLAN Tagging Special VLAN Types 3 GVRP 4 Multiple Instance Spanning-TreeOperation 5Quality of Service (QoS): Managing Bandwidth More Effectively QoS Queue Configuration N o t e Page Page Page Page Page Page copy tftp ProCurve hostname Displayed Text Figure 1-1.Example of a Figure Showing a Simulated Screen Page Page Figure 1-2.Online Help for Menu Interface Figure 1-5.Button for Onboard Administrator Interface Online Help setup 8.Run Setup Page Page Page Page VLAN Features The Default VLAN: The Secure Management VLAN: Voice VLANs: Static VLAN: Dynamic VLAN Tagged Packet: Tagged VLAN: Untagged VLAN Table 2-1.Comparative Operation of Port-Basedand Protocol-BasedVLANs Table 2-2.VLAN Environments The Default VLAN Figure 2-1.Example of a Switch in the Default VLAN Configuration Figure 2-2.Example of Multiple VLANs on the Switch Protocol VLAN Environment Figure 2-3.Example of Overlapping VLANs Using the Same Server Figure 2-4.Example of Connecting Multiple VLANs Through the Same Link Introducing Tagged VLAN Technology into Networks Running Legacy (Untagged) VLANs Figure 2-5.Example of Tagged and Untagged VLAN Technology in the Same Network Figure 2-6.Comparing Per-PortVLAN Options With and Without GVRP Table 2-3. Per-PortVLAN Configuration Options - or Forbid DHCP/Bootp: Per-VLAN Features: Deleting Static VLANs: Adding or Deleting VLANs: write memory Inbound Tagged Packets: Figure 2-7.Untagged VLAN Operation Figure 2-8.Tagged VLAN Operation Table 2-4.Example of Forwarding Database Content Page The Problem The Solution Page 2.Switch Configuration 8.VLAN Menu … 1.VLAN Support Figure 2-12.The Default VLAN Support Screen [E] Maximum VLANs to support Figure 2-13.VLAN Menu Screen Indicating the Need To Reboot the Switch 8.VLAN Menu … 2.VLAN Names Figure 2-14.The Default VLAN Names Screen Add 802.1Q VLAN ID : Name : Name Figure 2-15.Example of VLAN Names Screen with a New VLAN Added 2. Switch Configuration 8. VLAN Menu … 3. VLAN Port Assignment Edit Untagged, or Forbid) Untagged VLANs Figure 2-17.Example of Port-BasedVLAN Assignments for Specific Ports VLAN Commands Maximum VLANs to support: Primary VLAN: Management VLAN: 802.1Q VLAN ID: Status: Port-Based Protocol: Dynamic: Voice: Port name: VLAN ID: Mode: Figure 2-19.Example of “Show VLAN Ports” Cumulative Listing Figure 2-20.Example of “Show VLAN Ports” Detail Listing Port Information: DEFAULT: Unknown VLAN: Figure 2-21.Example of “Show VLAN” for a Specific Static VLAN Figure 2-22.Example of “Show VLAN” for a Specific Dynamic VLAN Note: Figure 2-23.Example of Command Sequence for Changing the Number of VLANs Changing the Primary VLAN show vlans vlan [no] Figure 2-25.Example of Creating a New, Port-Based,Static VLAN show vlan VLAN already exists Page Page Figure 2-26.Example of Tagged and Untagged VLAN Port Assignments Figure 2-27.Example of VLAN ID Numbers Assigned in the VLAN Names Screen Figure 2-28.Example of Networked 802.1Q-CompliantDevices with Multiple VLANs on Some Ports Switch Switch Y Page Page Figure 2-29.Example of Potential Security Breaches Figure 2-30.Example of Management VLAN Control in a LAN Table 2-5.VLAN Membership in Figure reboot My_VLAN Figure 2-31.Illustration of Configuration Example Figure 2-32.Example of DHCP Server on Management VLAN Figure 2-33.Example of DHCP Server on Different VLAN from the Management VLAN Figure 2-34.Example of no Management VLANs Configured Figure 2-35.Example of Client on Different Management VLAN from DHCP Server Figure 2-36.Example of DHCP Server and Client on the Management VLAN write-memory Page Voice VLAN(s): Tagged/Untagged VLAN Membership: Page no vlan Page Page Page N o t e : max vlans Figure 3-1.Example of Forwarding Advertisements and Dynamic Joining Switch “D” GVRP On Figure 3-2.Example of GVRP Operation IP Addressing Table 3-1.Options for Handling “Unknown VLAN” Advertisements: show gvrp Figure 3-3.Example of GVRP Unknown VLAN Settings Page Table 3-2.Controlling VLAN Behavior on Ports with Static VLANs Page Page 2.Switch Configuration … Figure 3-4.The VLAN Support Screen (Default Configuration) Yes Unknown VLAN Figure 3-5.Example Showing Default Settings for Handling Advertisements ave GVRP Commands Used in This Section Figure 3-6.Example of “Show GVRP” Listing with GVRP Disabled Figure 3-7.Example of Show GVRP Listing with GVRP Enabled Enabling and Disabling GVRP on the Switch. This command enables Syntax: gvrp Figure 3-8.Displaying the Static and Dynamic VLANs Active on the Switch Figure 3-9.Example of Listing Showing Dynamic VLANs Configuration Page Page Page Page Page Figure 4-1.Example of a Multiple Spanning-TreeApplication C a u t i o n Figure 4-2.Example of MSTP Network with Legacy STP and RSTP Devices Connected MST Region: Internal Spanning Tree (IST): Internal Page Figure 4-3.Active Topologies Built by Three Independent MST Instances Page Connectivity within the Same MST Instance BPDU — BPDU Filtering — BPDU Protection — Bridge: Common Spanning Tree (CST): MSTP Bridge: RSTP — Spanning-tree STP — SNMP — instance vlan legacy-path cost Note on Path Cost Page Region Revision Number: spanning-tree config-revision max-hops –Force-Versionoperation: spanning-tree force-version –Forward Delay: spanning-tree forward-delay maximum-age 3.Configure MST instances spanning-treeinstance < n > vlan < vid no spanning- tree instance 5.Configure MST instance port parameters instance Page pending stp-compatible: rstp-operation: mstp-operation: force-version (Default: MSTP-operation.) 802.1t Global > hello- time < 1..10 apply: config-name: config-revision: instance: reset: Disabled admin-edge-port admin edge-port auto-edge-port auto Yes - enabled global hello- time true default) false auto: show running root- guard tcn-guard Command Syntax and Example always Figure 4-5.Example of BPDU Filter in Show Spanning Tree Configuration Command Figure 4-6.Example of BPDU Filters in the Show Configuration Command Figure 4-7.Example of BPDU Protection Enabled at the Network Edge Example interface enable period using the spanning-tree bpdu-protection-timeout command bpdu-protection Figure 4-9.Example of BPDU Filters in the Show Configuration Command spanning-tree instance vlan Switch Priority auto Page instance ist > instance ist Page apply config-name config-revision: reset config-revision pending apply ■Region name (spanning-tree config-name) ■Region revision number (spanning-tree config-revision) Page Figure 4-11.Example of Mapping VLANs on Other ProCurve Switches Page show config files Figure 4-12.An Example of the show config files Command Output Figure 4-13.A Config File for the Current Software Version is Created show flash Page Page a20-a42,trk1 Figure 4-15.Example of Common Spanning Tree Status Page Page Page show spanning-tree a20-a24,trk1config instance Figure 4-19.Example of the Configuration Listing for a Specific Instance Figure 4-20.Example of a Region-LevelConfiguration Display Figure 4-21.Example of Displaying a Pending Configuration root-history cst ist mst root-guard root- history priority instance priority Figure 4-22.Example of show spanning-tree root-historycst Command Output Figure 4-23.Example of show spanning-tree root-historyist Command Output Figure 4-24.Example of show spanning-tree root-historymsti Command Output debug- counters Figure 4-25.Example of show spanning-tree debug-countersCommand Output debug- counters instance Page ports a2-a8 a20 trk1 trk4-trk5 Page output of show spanning-tree debug-counters commands Table 4-1.MSTP Debug Command Output: Field Descriptions Page Page Table 4-2.Troubleshooting MSTP Operation On ports connected to unmanaged devices Figure 4-29.Examples of Loop Protection Enabled in Preference to STP loop-protect N o t e s interval trap to receive-action send-disable Figure 4-30.Example of Show Loop-ProtectDisplay Page Page Page Set Priority Honor Priority Change Priority Honor New Priority Set Policy 802.1p prioritization: Type-of-Service (ToS): Page Table 5-1.Port Queue Exit Priorities Page Table 5-2.QoS Priority Settings and Operation Table 5-3.Mapping Switch QoS Priority Settings to Device Queues M u l t i p l e C r i t e r i a Table 5-4.Classifier Search Order and Precedence Table 5-5.Summary of QoS Capabilities Table 5-6.Applying QoS Options to Traffic Types Defined by QoS Classifiers Page Page QoS Classifier Precedence: ToS IP-Precedence Mode: ToS Differentiated Services (Diffserv) Mode: Figure 5-3.Example of Enabling ToS IP-PrecedencePrioritization Figure 5-4.Interior Switch “B” Honors the Policy Established in Edge Switch “A” 4.Enable diff-services diff-services Page incoming-DSCP outgoing- DSCP Page Page A Differentiated Services Codepoint (DSCP): qos dscp map Figure 5-10.The ToS Codepoint and Precedence Bits Table 5-7.How the Switch Uses the ToS Configuration ToS Option: Table 5-8.ToS IP-PrecedenceBit Mappings to 802.1p Priorities qos interface Figure 5-11.Configuring and Displaying Source-PortQoS Priorities Figure 5-12.Returning a QoS-PrioritizedVLAN to “No-override”Status Steps for Creating a Policy Based on Source-PortClassifiers Page Figure 5-13.Display the Current Configuration in the DSCP Policy Table Figure 5-14.Assign Priorities to the Selected DSCPs Figure 5-15.The Completed Source-Port DSCP-PriorityConfiguration Radius Override Field ascii-string policy name, if Table The Default DSCP Policy Table > priority < 0 - 7 >) Effect of show qos classifier Table 5-10.Error Messages Generated by DSCP Policy Changes Page port-priority Page Table 5-11.Details of Packet Criteria and Restrictions for QoS Support All Switches: For Devices that Do Not Support 802.1Q Maximum QoS Configuration Entries: Table 5-12.Maximum QoS Entries Not Supported: Monitoring Shared Resources: Page Numerics