HP mp3135w manual If the projected colors seem completely wrong

Fixing Problems

❏Open the on-screen menu and select Adjust picture > Color space. Change the selection.

❏Open the on-screen menu and select Help > Diagnostics. Run color tests.

If the projected colors seem completely wrong:

❏For a YPbPr or RGB input device, be sure all the video connectors are correctly matched.

❏Be sure the pins on the cable connectors are not bent or broken.

❏Open the on-screen menu and select Adjust picture > Color space. Change the selection.

❏Open the on-screen menu and select Help > Diagnostics. Run color tests.

❏Reset the picture settings to the factory-default settings. See the following problem.

If the picture settings are completely wrong and you cannot fix them:

❏Reset the projection settings to the factory-default settings. To do this, hold down the back + up + right buttons on the projector for 5 seconds. (This does not reset attachment module settings.)

If a DVI device causes an error message or garbage on the screen:

❏Certain high-definition digital sources incorporate High-bandwidth Digital-Content Protection (HDCP) content protection. Such content cannot be displayed by this projector. If the device has another output port, such as S-video, try connecting that port to the projector.

If the projector stops responding to all controls:

❏If possible, turn off the projector, then unplug the power cord and wait at least 15 seconds before reconnecting power.

64 User’s Guide