To use the HP Quick Release with a VESA-configured digital signage player:

1.Using four 15 mm screws included in the mounting device kit, attach one side of the HP Quick Release to the digital signage player as shown in the following illustration.

Figure C-2Connecting the HP Quick Release to the digital signage player

2.Using four screws included in the mounting device kit, attach the other side of the HP Quick Release to the device to which you will mount the digital signage player. Make sure the release lever points upward.

Figure C-3Connecting the HP Quick Release to another device

22 Appendix C Mounting the digital signage player

Page 28
Image 28
HP MP4 manual