Using the On-Screen Display Menu
❏Clock Phase—Increases/decreases the value to minimize video distortion or video jitter. This selection is not available when a source is connected to the DVI connector.
✎If the projector image becomes distorted when adjusting the Clock and Clock Phase values, continue adjusting the values until the distortion disappears. To restore the factory settings, select Factory Reset in the on-screen display menu, or press the Resync button.
❏Zoom—Magnifies an image up to a factor of 32 on the projection screen (zooms in to a specific area on the screen, and pans left, right, up, and down).
❏Vertical Keystone—Adjusts image distortion at the top and bottom widths of the screen caused by tilting the projector.
❏Flip Image—Allows the projected image to be rotated.
■Color—Adjusts color balance to compensate for ambient conditions using three submenus:
❏7100 K—Factory default
❏Custom Color—Modifies the color temperature balance. Displayed only when VGA sources are displayed. You can independently adjust the red, green, and blue colors using this selection.
✎If Custom Color is modified and saved, this selection will not be reset if the Factory Reset selection is later used. To restore factory color settings, select 7100 K.
❏Video Adjustments—Modifies the color intensity. Displayed only when video sources are displayed.
3–8 | Compaq iPAQ Microportable Projector MP4800 User’s Guide |