Care and Maintenance

Follow these steps to replace the projector lamp module:

1.Turn off the main power switch on the side of the projector.

2.Allow the projector to cool down for at least 30 minutes.

ÅWARNING: The lamp assembly operates at a very high temperature. To reduce the risk of personal injury, allow the projector to cool down for at least 30 minutes before opening the lamp cover. Never open the lamp cover while the projector is operating or when the lamp is hot.

3.Disconnect the power cord.

4.Turn the projector upside down.

5.Use a Phillips screwdriver to remove the two screws 1 from the lamp cover.

6.Remove the cover 2.

7–4

Compaq iPAQ Microportable Projector MP4800 User’s Guide