![](/images/new-backgrounds/1241935/24193537x1.webp)
Removing a Bezel Blank
On some models, there is a bezel blank covering the internal drive bay that needs to be removed before installing a drive. To remove a bezel blank:
1.Remove the access panel and front bezel.
2.To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 2-5 Removing a Bezel Blank
Removing a Bezel Blank | 13 |