![](/images/new-backgrounds/1241935/24193589x1.webp)
Type 3
a.Pull back on the clip (1) that is holding the battery in place, and remove the battery (2).
b.Insert the new battery and position the clip back into place. Figure
NOTE: After the battery has been replaced, use the following steps to complete this procedure.
8.Replace the computer access panel.
9.Plug in the computer and turn on power to the computer.
10.Reset the date and time, your passwords, and any special system setups using Computer Setup.
11.Lock any security devices that were disengaged when the computer access panel was removed.
39