![](/images/new-backgrounds/1241935/24193553x1.webp)
12.Reconnect the power cord and turn on the computer.
13.Lock any security devices that were disengaged when the computer cover or access panel was removed.
The computer automatically recognizes the additional memory when you turn on the computer.
Replacing the Optical Drive
The computer uses a slimline Serial ATA (SATA) optical drive.
Removing the Optical Drive
CAUTION: All removable media should be taken out of a drive before removing the drive from the computer.
1.Remove/disengage any security devices that prohibit opening the computer.
2.Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.Turn off the computer properly through the operating system, then turn off any external devices.
4.Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION: Regardless of the
5.If the computer is on a stand, remove the computer from the stand and lay the computer down.
6.Remove the computer access panel and front bezel.
Replacing the Optical Drive | 21 |