Removal and Replacement Procedures

3.Remove the two pewter M2.5 × 7.0 screws ￿ that secure the keyboard to the top cover (Figure 5-4).

4.Lift up the back edge of the keyboard and swing it up and forward ￿ until it rests on the top cover.

5.Release the zero insertion force (ZIF) connector ￿ to which the keyboard cable is connected and disconnect the keyboard cable ￿.

Figure 5-4. Removing the Keyboard

6. Remove the keyboard.

Reverse the above procedure to install the keyboard.

Maintenance and Service Guide

5–7