Removal and Replacement Procedures

4.Position the base enclosure so the front faces you.

5.Remove the following screws, as illustrated in Figure 5-20:

￿two black M2 × 14.5 screws ￿ that secure the PC Card assembly to the base enclosure

￿black M2.5 × 4.5 screw ￿ near the USB connector that secures the system board to the base enclosure

￿black M2.5 × 4.0 screw ￿ that secures the modem connector/cable to the base enclosure

￿black M2 × 4.0 screw ￿ near the display connector that secures the system board to the base enclosure

Figure 5-20. Removing the System Board Screws

5–30

Maintenance and Service Guide