
Removal and Replacement Procedures
5.8 EMI Shield
The EMI shield is included in the Miscellaneous Hardware Kit (spare part number
1.Prepare the computer for disassembly (Section 5.3) and remove the following components:
a.Hinge covers (Section 5.5)
b.Keyboard (Section 5.6)
c.Display (Section 5.7)
2.Remove the black M2 × 12.5 screw that secures the EMI shield to the base enclosure (Figure
3.Lift the back edge of the EMI shield up and swing it forward , then slide the EMI shield toward the back of the computer at a
4.Remove the EMI shield.
Figure
Reverse the above procedure to install the EMI shield.
Maintenance and Service Guide |