8

Setting Up

HP recommends professional installation from an authorized installer to ensure maximum enjoyment of your HP Plasma HDTV. Be sure to read all the safety information and precautions before starting installation. See these topics:

“Important Safeguards” on page iii

“Important Information” on page viii

“Important Safety Instructions” on page iv

Selecting a Good Location

Select the location for your HP Plasma HDTV. Consider the following conditions when positioning the TV:

Power cord length: Choose a location with easy access to an AC power outlet.

Cable lengths and distances to attached units: Check that cables can reach the TV.

Do not install the TV on an unstable cart or stand; the unit may fall over and cause injury.

Do not install the TV where it has a protruding edge, such as on a small table where the display overhangs the table surface.

Do not hang the TV from the ceiling; the unit may fall and cause injury.

Avoid direct sunlight that may damage the display or interfere with the operation of the remote control.

Avoid areas of high humidity or damp conditions that may cause fire or electrical shock.

Do not install TV near appliances, such as a microwave, or near a heat source, such as a fireplace or radiator.

Do not place the TV on a sloped or unstable surface.

Provide adequate ventilation clearance around the TV. If using the pedestal, leave a space of 3.96 inches (10 cm) or more at the top, left, and right; 2.36 inches (6 cm) or more at the bottom; and 2.76 inches (7 cm) or more at the rear. If using some other method for setup, leave a space

of 3.96 inches (10 cm) or more at the top, left, right, and bottom; and 0.75 inches (1.9 cm) or more at the rear.

A

B

B

C

A4 in. (10 cm) minimum above TVB4 in. (10 cm) minimum at sidesC2.8 in. (7 cm) minimum behind TV Note: Speakers not shown.

Setting Up

Setting Up 7