Using the System Menu

Use the System menu to select the language for the OSD menus, find the software version, start the Setup Wizard, return OSD settings to default values, select the Standby Mode, and start White Wash to reduce the appearance of afterimage.

System menu

Options

 

 

 

OSD

■

Language: English/

 

 

French/Spanish

 

■

OSD timeout: Short/

 

 

Middle/Long

 

 

Software Version

Shows TV software

 

version number

 

 

Setup Wizard

Start the setup wizard:

 

Yes/No

 

 

Default Settings

Press OK to recover all

 

settings to default

 

values.

 

 

 

White Wash

■

Yes/No

 

 

 

Standby Mode

■

Low power

 

■

Fast power

 

 

 

Starting the Setup Wizard

In the Setup Wizard menu, choose Yes, and press OK. Then, turn off the TV, and turn it on again to start the Setup Wizard.

Returning to Default Settings

In the Default Settings menu, return all settings, including the channel list, to default value by selecting Default Settings, and then pressing OK.

Using White Wash

In the White Wash menu, select Yes and press OK to display an all-white screen for 3 minutes. This can reduce the appearance of an afterimage resulting from a fixed screen image.

n

Extensive use of White Wash may reduce the lifetime of the panel.

Selecting the Standby Mode (Power Control)

The Standby Mode menu setting can save energy. The setting determines the power used by the TV when it is turned off and enters standby.

■Low power: Consumes less power while in standby, uses approximately 20 seconds of power-up time.

■Fast power: Consumes more power while in standby, uses approximately 5 seconds of power- up time.

40HP Plasma HDTV User’s Guide