3Press the Save/Print button on the dock. The HP Image Transfer software will launch on your computer. If you have set the software to automatically transfer the images from the camera, the images will automatically transfer to the computer. Otherwise, in the Welcome screen, click Start Transfer. If there were any images on the camera that had been selected for printing or e-mail, those actions are started after the images have been transferred to the computer.

4When the transfer screen on the computer says Finished, your images have been saved and shared. You can leave the camera in the dock to recharge the camera battery.

Printing Images Using the Dock

1Confirm the following:

•The dock insert for your camera is attached to the top of the camera dock. (See step 1 on page 6.)

•The USB cable for connecting to an HP printer (or the USB cable for connecting to a computer if you have a non-HP printer) is connected between the camera dock and your printer, and the power cable is plugged into the dock. (See step 2 on page 7.)

•The printer is turned on and paper is loaded in the printer. Refer to your camera manual for printer setup information.

2Insert the camera into the camera dock. The camera will turn on automatically.

11