Problem | Possible cause | Solution |
The camera | There is a | Run the dock functionality test by |
is not | functional | unplugging the power cord from |
recognized | problem with | the dock, then holding down the |
by the | the dock. | two buttons on the front of the dock |
computer |
| while you plug the power cord |
when it is in |
| back into the dock, and continue |
the dock. |
| holding the buttons down. If the |
(continued) |
| dock lights come on in 5 seconds |
| (blinking or solid), then the dock is | |
|
| |
|
| fully functional. |
|
|
|
Cannot | The TV is not | Check your TV user’s manual to set |
display | set to the | the TV to accept video or input |
images on | correct input | mode. |
the TV. | mode. |
|
|
|
|
| Audio and | Try switching the audio and video |
| video cables | cables on the back of the TV, DVD |
| are switched. | player, or VCR. |
|
|
|
| Incorrect video | Change the TV configuration |
| signal format | setting in your camera (see your |
| (NTSC or PAL). | camera User’s Manual). |
|
|
|
19