QuickSpecs
HP rp5800 Retail System
Standard Features and Configurable Components (availability may vary by country)
I/O Ports
USB 2.0 | Front: Two (2), covered |
| Rear: Five (5) |
USB 24V | One (1) 24V powered USB |
Serial | Two (2) |
Parallel | One port available as an option* |
eSATA | One port available as an option* |
Two (2) | |
USB+PWR 12V | Two (2) USB+PWR 12V cards optional (three (3) 12 Volt USB+ PWR per card) for a total of 6* |
PS/2 | One (1) |
| One (1) |
One (1) | |
Video | One (1) VGA |
| One (1) DisplayPort v1.1a |
| Provides integrated dual independent monitor support |
DVI output | Available via optional DisplayPort to DVI Adapter |
Audio | Rear: Line input (supports microphone or line input) and line out |
| All ports are 3.5mm in diameter |
| NOTE: See Audio/Visual section for information on |
NIC | One (1) Industry standard |
*These options occupy slot openings so less slots will be available when the options are installed
Serial Ports (Power Configurable in HP Bios) – detail
1 and 2: Powered Configurable serial port expansion card installation that supplies two additional serial ports (COM3 and COM4)
3 and 4: Two Power Configurable serial ports, COM1 and COM 2, are standard on the POS System.
DA - 13982 North America — Version 12 — November 8, 2013 | Page 10 |