![](/images/new-backgrounds/1220674/22067437x1.webp)
QuickSpecs
HP rp5800 Retail System
Technical Specifications
Other Features
Advanced Configuration and Power Management Interface (ACPI). Allows the system to wake from a low power mode. Controls system power consumption, making it possible to place individual cards and peripherals in a
System Management BIOS v2.6
Intel Wired for Management support; industry wide initiative to make Intel architecture based Retail Systems, PCs, servers and mobile computers more inherently manageable
Dual State Power Button; acts as both an on/off button and a
Serviceability Features
Dual colored power LED on front of the HP rp5800 Retail System to indicate either normal or fault condition Indicator Lights on front of system:
Power / Diagnostic LED | Hard Drive LED |
NIC Link LED | NIC Activity LED |
Diagnostic LED Explanation Table:
Number of
3 – processor not installed
4 – power supply failure
5 – memory error
6 – video error
7 – PCA failure (ROM detected failure prior to video)
8 – invalid ROM, bootblock recovery mode
9 – system not fetching code
10 – system hang while loading an option ROM System/Emergency ROM
NIC Link and activity LED's on front bezel Flash ROM
CMOS Battery Holder for easy replacement
Flash Recovery with Video Configuration Record Software 5 Aux Power LED on System PCA
Processor ZIF Socket for easy Upgrade
DIMM Connectors for easy Upgrade Clear CMOS Button
NIC LEDs (integrated) (Green & Amber) - Rear Color coordinated cables and connectors
Front power button
System memory can be upgraded without removing the system board or any internal components
NOTE: thumb screw release mechanism is used with the
DA - 13982 North America — Version 12 — November 8, 2013 | Page 19 |