QuickSpecs
HP rp5800 Retail System
Technical Specifications - Data Storage Drives
HP Solid State Drives
Unformatted Capacities |
| |
Architecture | Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller | |
Interface | Serial ATA (SATA) |
|
Dimensions (W x H x D) | 2.74 x 0.37 x 4 in/6.98 x 0.95 x 10.2 cm | |
Weight | 0.18 lb/80 g |
|
Bandwidth Performance | Sustained Sequential Read: | Up to 250 MB/s |
| Sustained Sequential Write: | Up to 70 MB/s |
| Random Read: | Up to 35K IOPs |
| Random Write: | Up to 6.6K IOPs |
Latency | Read: | |
| Write: | |
Power | DC power requirement: | 5 VDC |
| Total power consumption: | 0.15W (active); 0.075W (idle) |
Useful Drive Life | 35TB written, up to 20GB/day for 5 years | |
Environmental | Operating Temperature: | 32° to 158° F (0° to 70° C) |
(all conditions, | Relative Humidity: | 5% to 95% |
| Maximum Wet Bulb | 84° F (29° C) |
| Temperature (operating): |
|
| Shock: | 1,500 |
NOTE:
For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive before a portion of the drive is reserved for flash management features. Actual capacity varies by content and will be less than 15.8GB.
HP 250-GB Hard Disk Drive (3.5”)
Capacity | 250,059,350,016 bytes |
| |
Rotational Speed | 7,200 rpm |
|
|
Interface | Serial ATA (SATA) 3.0 |
| |
Synchronous Transfer Rate | Up to 6 GB/s |
|
|
(maximum) |
|
|
|
Buffer Size | 8 MB |
|
|
Logical Blocks | 488,397,168 |
|
|
Seek Time (typical reads, | Single Track: | 1.0 ms |
|
includes controller overhead, | Average: | 8.5 ms |
|
including settling) |
| ||
18 ms |
| ||
|
| ||
Height (nominal) | 1 in/2.54 cm |
|
|
Width (nominal) | Media diameter: 3.5 in/8.89 cm |
| |
| Physical size: 4 in/10.2 cm |
| |
Operating Temperature | 41° to 131° F (5° to 55° C) |
| |
|
|
|
|
| DA - 13982 | North America — Version 12 — November 8, 2013 | Page 32 |