HP S231d 23-in IPS BLU Docking manual Enww

5.Connect the circular end of the power supply cord to the DC power IN connector on the back of the monitor. Connect the female end of the three-pronged power cord to the power supply and the male end to an electrical wall outlet.

NOTE: The outer case of DC Out 90 watt devices must meet IEC60950–1 requirements.

WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times.

Disconnect power from the computer by unplugging the power cord from the AC outlet.

If provided with a 3–pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3–pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2–pin adapter. The grounding pin is an important safety feature.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

6 Chapter 2 Setting Up the Monitor ENWW