HP S LP2065, S LP1965, S LP2465 manual OSD Menu

Table 4-2	OSD Menu (continued)
Icon	Main Menu	Submenu	Description
		DDC/CI Support	Allows the computer to control some OSD menu features such
			as brightness, contrast and color temperature. Set to:
			●	On
			●	Off
			The factory default is On.
		Sleep Timer	Provides the timer adjustment menu options:
			● Set Current Time—sets the current time in hours and
				minutes
			● Set Sleep Time—sets the time you want to place the
				monitor in sleep mode
			● Set on Time—sets the time you want the monitor to wake
				up from sleep mode
			● Timer—sets the Sleep Timer feature On or Off. The default
				setting is Off
			● Sleep Now—immediately sets the monitor to enter sleep
				mode
	OSD Control		Adjusts the position of the OSD menu on the screen.
		Horizontal Position	Changes the viewing position of the OSD menu to the left or
			right area of the screen. The factory default range is 50.
		Vertical Position	Changes the viewing position of the OSD menu to the top or
			bottom area of the screen. The factory default range is 50.
		OSD Timeout	Sets the time duration in seconds that the OSD is visible after
			the last button is pressed. The factory default is 30 seconds.
		OSD Transparency	Adjust to view the background information through the OSD.
	Information		Selects and displays important information about the monitor.
		Current Settings	Provides the current input video mode.
		Recommended Settings	Provides the recommended resolution mode and refresh rate
			for the monitor.
		Serial Number	Reports the serial number of the monitor. The serial number is
			needed if contacting HP technical support.
		Version	Reports the firmware version of the monitor.
		Backlight hours	Reports the total hours of backlight operation.
	Video Input		Selects the default or primary video input signal when the
	Control		monitor is connected to two active and valid video sources. The
			monitor will automatically determine the video format. The
			default input selection is DVI.
		DVI-I#1	Selects DVI-I 1 input. This input accepts either analog or digital
			signals.
		DVI–I#2	Selects DVI-I 2 input. This input accepts either analog or digital
			signals.

26 Chapter 4 Operating the Monitor ENWW