System Firmware
The firmware on HP 9000 systems is known as Processor Dependent Code (PDC). On HP Integrity® systems, the system firmware is based on the Extensible Firmware Interface (EFI)
specifications. There is also an EFI driver component of the A7173A adapter firmware for Integrity® systems.
Processor Dependent Code (PDC) on HP 9000 Systems
PDC is the system firmware on HP 9000 systems. To determine the correct PDC for
http://docs.hp.com/en/netcom.html#SCSI%20Host%20Bus%20Adapters
The Boot Console Handler (BCH) menus are used offline to confirm the PDC version that is installed on a
If you do not have the correct PDC version installed on your system, contact your HP representative for details on obtaining and installing the correct PDC version.
Extensible Firmware Interface (EFI) on HP Integrity Systems
The system firmware on HP Integrity® systems is based on the Extensible Firmware Interface (EFI) specifications. An EFI utility can be used offline to verify the system firmware version that
is installed on HP Integrity® systems. See, “Using the EFI Utility on HP Integrity Systems” (page 32), for details.
See the HP Ultra320 SCSI Host Bus Adapter Support Matrix on http://docs.hp.com to determine the minimum system firmware version that is needed to use the A7173A adapter on your system.
For a matrix of system firmware for I/O adapters with
If the system firmware version installed on your
If you need to patch your firmware, the ITRC provides a patch database, as well as patch documentation that includes installation instructions. To access patches, log in to your appropriate region; click “Maintenance and support (for hp products),” then search for individual patches and firmware.
System Firmware | 15 |