HP SCSI Host Bus Adapters Setting the SCSI ID Online, Status, [Passed], [Successful], #mptconfig -i6 /dev/mpt14, Scan For Devices to avoid id conflict

IdVersion Rate Width Device

------------------------------------------------------------------------------

0	BF1468A4B3	HPB5	Ultra320	Wide	Disk
1	BD1468A4C5	HPB4	Ultra320	Wide	Disk
3	BD1468A4C5	HPB4	Ultra320	Wide	Disk
4	BF1468A4B3	HPB5	Ultra320	Wide	Disk
5	BF1468A4B3	HPB5	Ultra320	Wide	Disk
8	BF1468A4B3	HPB5	Ultra320	Wide	Disk
-	PROLIANT 4L7E*DB	2.30	-	-	Enclosure

------------------------------------------------------------------------------

NOTE: The In Use Device column is only displayed on systems running HP-UX 11i v3.

Setting the SCSI ID Online

Use the -ioption on the mptconfig command to change the SCSI ID of a SCSI initiator. For example:

#mptconfig -i 6 /dev/mpt14

Confirm: Do you want to change scsi parameters (y/[n]): y

Scan For Devices to avoid id conflict ...	[Passed]
Status ..................................	[Successful]

#

If you attempt to change the SCSI ID to a number that is already in use by another device, the mptconfig -icommand will fail and a message will alert you that the SCSI ID you selected is already in use.

#mptconfig -i 5 /dev/mpt14

Confirm: Do you want to change scsi parameters			(y/[n]): y
Scan For Devices to avoid id conflict ...			[Failed]
Initiator id conflicts with target id: 5.
Status ..................................			[Failed]
---- TARGET PARAMETERS -------------------------------------------------------
Target Description	Firmware	In Use	In Use	In Use
Id	Version	Rate	Width	Device

------------------------------------------------------------------------------

0	BF1468A4B3	HPB5	Ultra320	Wide	Disk
1	BD1468A4C5	HPB4	Ultra320	Wide	Disk
3	BD1468A4C5	HPB4	Ultra320	Wide	Disk
4	BF1468A4B3	HPB5	Ultra320	Wide	Disk
5	BF1468A4B3	HPB5	Ultra320	Wide	Disk
8	BF1468A4B3	HPB5	Ultra320	Wide	Disk
-	PROLIANT 4L7E*DB	2.30	-	-	Enclosure

42 Configuring the A7173A Adapter