Updating the EFI Driver
If you select an EFI driver file from the Select Firmware Image menu, (such as lsimpt.rom in Example
You are about to install EFI Driver version 1.04.02.00
Do you want to proceed? (y/n)
If you press y, a status screen appears, displaying the progress of the operation. For example:
Installing EFI Driver Image for Seg:00 Bus:80 Dev:01
Percentage Completed - 100%
This operation may take up to one minute.
Firmware Image Installation successful for Seg:00 Bus:80 Dev:01
Updating Vital Product Data (VPD)...Done
Updated Seg:00 Bus:80 Dev:01 to EFI Driver Version 1.04.02.00
Press any key to continue
Press any key to return to the main menu.
Advanced Operations: Save SCSI Firmware Image or EFI Driver Image to File
To perform advanced operations, select Advanced Operations from the main menu and press Enter. The following menu displays:
Parallel SCSI Offline Operations Utility
(C)Copyright 2004
Save SCSI Firmware Image to file
Save EFI Driver Image to file
Display Vital Product Data (VPD)
Main Menu
To save a SCSI firmware image or an EFI driver image to a file, use the arrow keys to highlight Save SCSI Firmware Image to file or Save EFI Driver Image to file, then press Enter to display the “Available SCSI Ultra320 Controllers” screen; for example:
Available SCSI Ultra320 Controllers
|
|
|
| Flash | SCSI | EFI |
Slot | Seg | Bus | Dev | Part | Firmware | Driver |
XX | 00 | 20 | 01 | No |
| 1.03.35.00 | 1.02.09.00 |
| SCSI Ultra320 |
|
|
|
| ||
01 | 00 | 80 | 01 | Yes | 1.03.39.00 | 1.04.02.00 | |
| SCSI Ultra320 |
| |||||
Back
Navigate using Arrow Keys and <Tab>.Press <Enter> to Select
Use the arrow keys to highlight a SCSI controller; then press Enter to display the “Choose File to save Firmware Image” screen. For example:
Choose File to save Firmware Image
<DIR> .. |
|
|
|
|
new.rom | Ultra320 | SCSI | Firmware | 1.03.39.00 |
it_1030.fw | Ultra320 | SCSI | Firmware | 1.03.35.65 |
38 Configuring the A7173A Adapter