HP B-series 16Gb FC Switches Quick Start Instructions

Overview

Read these instructions to set up and configure the HP SN6000B 16Gb 48-port Fibre Channel Switch and HP SN3000B 16Gb 24-port Fibre Channel Switch.

These instructions provide basic configuration steps. For detailed rack mount and configuration instructions, download the HP B-series 16Gb Switches Hardware Reference Guide from the storage section of the HP website: http://www.hp.com/support/manuals.

Figure 1 (page 1) shows the port side of the 48-port switch.

SN6000B 16Gb 48-port FC switch

Figure 1 Port side of the 48-port FC Switch

1. System status LED

6. FC ports (44-47)

2. Management Ethernet port

7. FC ports (4-7)

with LEDs

 

3. USB port

8. Switch ID pull-out tab

4. FC ports (0-3)

9. Serial console port

5. FC ports (40-43)

10. System power LED

©Copyright 2012 Hewlett-Packard Development Company, L.P. Printed in the U.S.

HP Part Number: 5697-1520

Published: March 2012*5697-1520*

Edition: 1

Verify the SN6000B 16Gb 48-port FC switch carton contents

Verify that the carton contains the following (any SFPs ordered will not be in this carton; they will be packaged separately):

•One HP SN6000B 16Gb 48-port FC Switch with two integrated power supply/fan assemblies

•Rubber feet, required to set up the switch as a standalone unit•Serial cable with an RJ-45 connector plus an adaptor for RJ-45 to DB9•HP SAN Network Advisor DVD•Brocade EZ Switch and China ROHS documentation

Page 1