HP Presario Adding videos, Capturing recorded video from a DV camera, Done, Play, Done, Browse, Filename, Filename, Add video, Stop Capture, Start Capture, Capture Folder

7Click Browse to select a place to save the files, and then click OK.

8Click Filename to specify a file name for the captured video file.

9Click Done to add the captured video file automatically to the movie project.

Capturing recorded video from a DV camera

For best results when using muvee autoProducer, capture only video footage that you are most interested in using in the movie project.

To capture recorded video to the hard disk drive:

1Connect the DV camera to the FireWire (IEEE 1394) port on the computer.

2Turn on the camera, and set it to VCR mode. Refer to the instructions in the manufacturer’s documentation.

3Click the Import Video/Pictures from a device button.

4Select From My Camcorder.

5Click the Play button to start viewing the video.

6Click Start Capture when you see the start of the video footage that you want to use in the movie project.

7Click Stop Capture to stop capturing.

8Repeat steps 5 and 6 to capture additional sections of video footage.

9Click Capture Folder to specify a folder for the captured video file.

10Click Filename to specify a file name for the captured video file.

11Click Done to automatically add the captured video files to the movie project.

Adding videos

To add video files to the movie project:

1Click the Add video button in the Video/Pictures area. The Add Video window opens.

2Browse the folders on the hard disk drive to select existing video files for the movie:

￿Add up to three video files.

￿Select multiple video files by pressing and holding the Ctrl key on the keyboard while you select the files.

196Getting Started (features vary by model)