Hard drive
NOTE: The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar cover.
Description | Spare part number |
|
|
|
|
|
|
|
|
|
|
Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws) | |
|
|
Before removing the hard drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power cord.
4.Remove the battery (see Battery on page 35).
Remove the hard drive:
1.Position the computer with the front toward you.
2.Loosen the two Phillips PM2.0×5.0 captive screws that secure the hard drive cover to the computer.
ENWW | Component replacement procedures 37 |
