4.Remove the fan (3).
Reverse this procedure to install the fan.
Heat sink
NOTE: The heat sink spare part kit includes replacement thermal material.
Description | Spare part number |
|
|
For use only on computer models equipped with discrete graphics subsystem | |
|
|
For use only on computer models equipped with UMA graphics subsystem | |
|
|
Before removing the heat sink, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power cord.
4.Remove the battery (see Battery on page 35).
5.Remove the following components:
a.Hard drive (see Hard drive on page 37)
b.Top cover (see Top cover on page 48)
c.Keyboard (see Keyboard on page 50)
64 Chapter 4 Removal and replacement procedures | ENWW |