16.Release the wireless module antenna cables (3) from the opening in the system board.

CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.

17.Remove the four Phillips PM2.5×6.0 screws (1) that secure the display assembly to the computer.

18.Lift the display assembly (2) straight up and remove it.

Reverse this procedure to install the display assembly.

58 Chapter 4 Removal and replacement procedures

ENWW

Page 66
Image 66
HP TM2 manual Enww