DLPI Primitives
Connection-mode Service Primitives
typedef struct { |
|
ulong | dl_primitive; |
ulong | dl_correlation; |
ulong | dl_called_addr_length; |
ulong | dl_called_addr_offset; |
ulong | dl_calling_addr_length; |
ulong | dl_calling_addr_offset; |
ulong | dl_qos_length; |
ulong | dl_qos_offset; |
ulong | dl_growth; |
} dl_connect_ind_t;
Parameters
dl_primitive
DL_CONNECT_IND
dl_correlation
correlation number to be used by the DLS user to associate this message with the DL_CONNECT_RES, DL_DISCONNECT_REQ, or DL_DISCONNECT_IND that is to follow.
dl_called_addr_length
length of the address of the DLSAP for which this DL_CONNECT_IND primitive is intended.
dl_called_addr_offset
offset from the beginning of the M_PROTO message block where the called DLSAP address begins.
dl_calling_addr_length
length of the address of the DLSAP from which the DL_CONNECT_REQ primitive was sent.
dl_calling_addr_offset
offset from the beginning of the M_PROTO message block where the calling DLSAP address begins.
dl_qos_length
length of quality of service parameter values desired by the calling DLS user.
dl_qos_offset
offset from the beginning of the M_PROTO message block where the quality of service parameters begin.
112 | Chapter 2 |
