DLPI Primitives
Local Management Primitives
The DLS user did not have proper permission to use the requested DLSAP address.
DL_BOUND
The DLS user attempted to bind a second stream to a DLSAP with dl_max_conind greater than zero, or the DLS user attempted to bind a second “connection management” stream to a PPA.
DL_OUTSTATE
The primitive was issued from an invalid state.
DL_NOADDR
The DLS provider could not allocate a DLSAP address for this stream.
DL_UNSUPPORTED
The DLS provider does not support requested service mode on this stream.
DL_SYSERR
A system error has occurred and the UNIX system error is indicated in the DL_ERROR_ACK.
DL_NOAUTO
Automatic handling of XID and TEST responses not supported.
DL_NOXIDAUTO
Automatic handling of XID response not supported.
DL_OUTSTATE
The primitive was issued from an invalid state.
DL_BIND_ACK
Reports the successful bind of a DLSAP to a stream, and returns the bound DLSAP address to the DLS user. This primitive is generated in response of a DL_BIND_REQ.
The message consists of one M_PCPROTO message block, which contains the following structure.
Message Format
Chapter 2 | 65 |
