HP UX 11i v2 Networking Software manual 9

Sl.	Scenario	Description	Solution 1	Solution 2
No.
	solution	AD279A 64-port solution’s
	(DB25 port	port module supports only
	module).	Male DB25 RS-232 serial
		ports.
		As a result, the existing
		cables cannot be
		connected to the AD279A
		64 port DB25 RS-232
		serial ports.
2	Replacing	The A6749A 64 port	Use a DB25 Male
	an existing	solution’s port module	to Female gender
	A6749A	supports Female DB25 RS-	changer to connect
	64- port	232 serial ports.	the custom made
	solution	The custom made cables	cables to AD278A
	(DB25 port	for this solution include	RS-232 DB25
	module)	Male DB25 RS-232	serial ports.
	with an	connectors to connect to
	AD278A 8-	the A6749A Female DB25
	port	RS-232 serial ports.
	solution.	However, the AD278A 8
		port solution supports only
		Male DB25 RS-232 serial
		ports.
		As a result, the existing
		cables cannot be
		connected to the AD278A
		8 port DB25 RS-232 serial
		ports.
3	Replacing	The A6749A 64 port	To connect the	Replace the DB25
	an existing	solution’s port module	custom made	connector of the
	A6749A	supports DB25 RS-232	cable, use a	custom made cable
	64- port	serial ports.	converter that	with the RS-232 RJ45
	solution	The custom made cables	supports 10-pin RS-	plug.
	(DB25 port	for this solution include	232 RJ45 plug at
	module)	DB25 RS-232 connector to	the AD279A	To replace the DB25
	with an	connect to A6749A DB25	solution end and a	connector with a RJ45
	AD279A	RS-232 serial ports.	RS-232 DB25	plug, detach wires
	64-port	However, the AD279A 64	Female connector	from the DB25
	solution	port solution’s port module	at the other end.	connector in
	(RJ45 port	supports only RJ45 serial		sequential order as
	module).	ports.	While designing	listed in Table 11,
		As a result, the existing	the converter,	and connect the wires
		cables cannot be	ensure that you	to the RJ45 plug.
		connected to the AD279A	follow the
		64 port solution’s RJ45 RS-	specifications listed
		232 serial ports.	in Table 11.