HP Virtual Connect Manager 1.16 manual Resolved issues

•When running with 16:1 oversubscription ratio on a VC-FC module, the hardware registers do not allow auto-routed traffic for the sixteenth server blade. When this scenario occurs, the firmware routes FC frames, causing a significant drop in the performance.

The following issues that existed in Virtual Connect 1.15b and earlier versions have been resolved in Virtual Connect 1.16:

•Server profiles could be assigned to a bay occupied by a non-server device.

•The Virtual Connect GUI labeled all server bays as Bay 0 and failed to recognize any servers in the enclosure.

•Signal quality for 10GBASE-CX4 cables was poor.

Resolved issues 13