QuickSpecs

HP Workstation xw4200

Memory

Intel 925X Express chipset

DDR-2 SDRAM ECC MEMORY

It is not necessary to add memory in pairs. Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This chart does not represent all possible memory configurations. The Intel 925X chipset supports ECC 533 MHz (PC2-4300) DDR-2 memory or non ECC and ECC 400 MHz (PC2-3200) DDR-2 memory.

For best performance the total amount of memory loaded into Channel A and Channel B should be the same. If it is not, your computer will see all the RAM installed but will run the memory controller at a lower performance mode. For best performance, add the memory in pairs rather than as a single DIMM (two 512 MB DIMMs will have better performance than a single 1 GB DIMM).Also, add the memory into both channels (e.g. one in socket 1 and one in socket 3) to take advantage of dual channel performance. If you have unused slots within a channel, make them socket 2 and socket 4. This provides the best margin for the memory bus. Mixing ECC and non-ECC memory will mean that all memory will run as non-ECC.Mixing speeds will mean that the memory runs at the speed of the slowest DIMM.

MAXIMUM MEMORY

Supports up to 4 GB of DDR-2 SDRAM.

POSSIBLE MEMORY CONFIGURATIONS

Not all memory configurations possible are represented below.

DIMM Size

 

 

Slot

 

 

 

 

 

 

 

 

1

2

 

3

4

 

 

 

 

 

 

256 MB

256 MB

 

 

 

 

 

 

 

 

 

 

256 MB

256 MB

 

 

256 MB

 

(single channel performance configuration)

 

 

 

 

 

 

 

 

 

 

 

1 GB

256 MB

256 MB

 

256 MB

256 MB

 

 

 

 

 

 

1 GB

512 MB

 

 

512 MB

 

 

 

 

 

 

 

1.5 GB

256 MB

256 MB

 

512 MB

512 MB

 

 

 

 

 

 

2 GB

1 GB

 

 

1 GB

 

 

 

 

 

 

 

2 GB

512 MB

512 MB

 

512 MB

512 MB

 

 

 

 

 

 

4 GB

1 GB

1 GB

 

1 GB

1 GB

 

 

 

 

 

 

DA - 12022 Worldwide — Version 6 — September 1, 2004

Page 14