Component

Doors, PCMCIA

Fan

Guide, hard disk drive

Guides, optical disk drive

Heatsink

Keyboard

Module, CPU

PCA, Audio

PCA, inverter

PCA, Modem/Mini-PCI

PCA, motherboard

Removal Procedure

Plug-in module (page 2-5).

Hard disk drive (page 2-6).

Keyboard cover (page 2-9).

Keyboard (page 2-11).

SDRAM modules (page 2-13).

Mini-PCI card (page 2-16).

Display assembly (page 2-18).

Fan and heatsink (page 2-22).

CPU module (page 2-25).

Top case (page 2-27).

Hinge saddles (page 2-30).

Motherboard (page 2-32).

See page 2-22.

Keyboard cover (page 2-9).

Keyboard (page 2-11).

Display assembly (page 2-18).

Top case (page 2-27).

Keyboard cover (page 2-9).

Keyboard (page 2-11).

Display assembly (page 2-18).

Top case (page 2-27).

See page 2-22.

See page 2-11.

See page 2-25.

Keyboard cover (page 2-9).

Keyboard (page 2-11).

Display assembly (page 2-18).

Top case (page 2-27).

Hinge saddle, left (page 2-30).

See page 2-20.

See page 2-15

See page 2-32.

Additional Steps

See Figure 2-25 on page 2-35.

Remove the retaining screws, and lift the guide off of the motherboard.

Remove the retaining screw on each guide, and lift the guides off of the motherboard

Carefully lift the PCA off of its connector, gently pull the audio jacks out of their openings in the bottom case, and lift the PCA out of the notebook.

Reassembly Notes: Make sure that the audio jacks fit through their openings in the bottom case, and the PCA is set securely on its connector.

2-38 Removal and Replacement

Technology Code ID)