Removing the Display Assembly
(Authorized Service Providers Only)
Required Equipment
•#1 Phillips screwdriver.
Removal Procedure
1.Unplug the AC adapter, if present, and remove the battery.
2.Remove the keyboard cover (page
3.Remove the two M2.5×6.0 mm retaining screws from the notebook rear panel.
4.Remove the M2.5×4.0 mm screws from the left and right antenna PCAs. Relocate the antenna PCAs away from the display assembly hinges.
5.Disconnect the display assembly cable from the motherboard.
6.Remove the six M2.5×6.0 mm retaining screws that secure the display assembly to the top case. Note that there is a grounding strap at the left hinge.
7.Lift the display assembly off of the notebook.
Service Manual | Removal and Replacement |