HSM HSM FA 500.2

0702 13

FA 500.2

Declaration of Conformity

Machinery directive 98 / 37 / EG

EMC directive 89 / 336 / EWG

Low voltage directive 73 / 23 / EWG

The manufacturer HSM GmbH + Co. KG, Bahnhofstrasse 115, D-88682 Salem declares herewith, that the paper shredder (Solo

machine) HSM FA 500.2 corresponds with the above mentioned EC Machine Directive including all relevant modiﬁ cations.

Applied standards and technical speciﬁ cations:

• EN 60204-1:1997-12 • EN ISO 12100-1:2003-11

• EN ISO 12100-2:2003-11 • EN 294:1992-06

• EN 55014-1:200-10 + A1:2001-10 + A2:2002-10 • EN 55014-2:1997-02 + A1:2001-12

• EN 61000-3-2:2000-12 • EN 61000-3-3:1995-01 + A1:2001-06

Caution:

It is prohibited to operate only one machine of a combination-version machine. Only the combination of document

shredder and HSM baling press fulﬁ ls the requirements of EN 294.

Salem, 01.12.2004

Rolf Gasteier - Technical Director

Machine type inspection for compliance with the requirements of the EC Machine Directive was carried out by the „Administration“/

Inspection Authority Committee of Experts, Subject Area „Ofﬁ ce Machines and Devices“, on the premises of the Verwaltungs-

Berufsgenossenschaft, Deelbögenkamp 4, D-22297 Hamburg. This inspection authority is the authority responsible in accordance

with Annex V of the EC Machine Directive.

11. Technical Data

Cutting type Cross cut

Cut size (mm) 10.5 x 40 - 76 7.5 x 40 - 80 6 x 40 - 53

Safety level DIN 32757 – 1 2 2 3

Cutting capacity (sheets), DIN A4, 70 g/m2

80 g/m2600 - 650

510 - 550 500 - 550

425 - 470 400 - 450

340 - 350

Cutting speed 210 mm/s

Effective width 500 mm

Weight approx. 725 kg

Voltage 3 x 400 V, 50 Hz

Rated power 9.2 kW

Rated current 18.1 A

Fuse rate 32 A

Plug CEE 32A

Sound level (idling / under load) 63 dB(A) / 80 dB(A)