HTC DREA160 To make a call on the Dialer, Touch the contact you want to call to place the call

48 Using Phone Features and Managing Contacts

To make a call on the Dialer

1.Touch the keys on the dialer to enter the phone number. As you enter numbers or letters, the screen will display matches found based on the phone keys you have touched.

The list is based on the contacts you have on your phone and Call log.

Tip If the phone keypad is not open, touch

at the bottom of the screen.

If you touched a wrong number key, touch to erase each subsequent digit of a number. To erase the entire number, touch and hold .

Note After entering the first few digits and the number you are dialing is not in your contacts, an Add to Contacts button will appear above the keypad.

Tap it to save the number to your Contacts.

2.Touch to close the phone keypad and to see if there are more matching numbers or contacts. To browse through the filtered list, flick through the list or slide your finger up or down the list slowly.

3.Touch the contact you want to call to place the call.

Note If the number you want to call does not appear on the screen, continue dialing the number and then press CALL to place the call.

Tip During a call, press the VOLUME UP/DOWN buttons on the left panel of the phone to adjust the in-call volume.