HTC NIKI100 Beam information using Bluetooth, To beam information from your device to a computer

Models: NIKI100

1 240
Download 240 pages 54.54 Kb
Page 166
Image 166

166Getting Connected

4.Tap the name of the Bluetooth headset, then tap Next.

5.Enter the passcode of the Bluetooth headset, then tap Next.

6.Make sure the Hands Free check box is selected. If you have a Bluetooth stereo headset, also make sure Wireless Stereo is selected.

7.Tap Finish.

While the Bluetooth stereo headset is connected, the Headset icon ( ) will appear on the title bar.

Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat steps 1 to 3 above. Tap and hold the name of the Bluetooth stereo headset and tap Set as Wireless Stereo.

Beam information using Bluetooth

You can beam information, such as contacts, calendar items, and tasks, as well as files from your device to your computer or to another Bluetooth- enabled device.

Note If your computer does not have built-in Bluetooth capability, you need to connect and use a Bluetooth adapter or dongle on your computer.

To beam information from your device to a computer

1.Turn on Bluetooth on your device, and make your device visible. For information about this, see “To turn Bluetooth on and make your device visible”.

2.Next, set Bluetooth on your computer to visible mode, create a Bluetooth partnership, then enable your computer to receive Bluetooth beams.

Note If the Bluetooth adapter or dongle on your computer was installed using a third-party provided driver, open the Bluetooth software that came with the Bluetooth adapter/dongle and enable the adapter/ dongle to be discovered by other devices. Refer to the Bluetooth adapter’s documentation for more information.

Page 166
Image 166
HTC NIKI100 user manual Beam information using Bluetooth, To beam information from your device to a computer