|
| Doc. No. | REV. | |
| HTC Corporation. |
|
|
|
| Issued Date | 2008/07/17 | A03 | |
| . |
|
| |
| Revised Date | 2009/01/15 | ||
|
| |||
|
|
| ||
|
|
|
|
|
Doc. Title | Converse Service Manual | Page | 58 of 78 |
CLASS C
CLASS D
IT IS GENERIC COSMETIC INSPECTION CRITERIA FOR ALL PRODUCTS IF THERE HAVE ANY CONFLICT WITH THESE GENERIC CRITERIONS; PLEASE FOLLOW THE PRODUCT INSPECTION CRITERIA RESPECTIVELY.
Description
¾D: Diameter / L: Length / W: Width / N: Number of defects/ S: Distance from dot to dot
¾Inspecting distance: 30 ± 5cm / Mechanical inspection angle:90 degrees /
¾LCM inspection angle:90±15 degrees / Inspection time:5 secs per surface.
¾Ambient illumination is to be
¾The inspection condition of Newton ring:
a.Inspection distance: 30cm / Inspection time: 5 sec
b.Ambient illumination is to be
c.Inspection should be performed under the condition that LCD screen could reflect the mirror image of lamp.
d.The criteria of Newton ring’s tinges and measure of area must follow up the
HTC CONFIDENTIAL