Roland F-50 If the Stand is Uneven, When Moving the Instrument, When Disassembling, Caps

Introduction

4.Stand the instrument back up.

When lifting the instrument back up, grasp near the center of the F-50, and gently raise the instrument.

If the Stand is Uneven

If after lifting the F-50 back up you find that stand is crooked, try loosening the screws and then securing them again. When retightening, start with the top screws, then work your way down. When doing this, slightly loosen the screws before firmly tightening them.

5.Place the caps over the heads of the screws (four on each side).

Caps

When Moving the Instrument

Disconnect the AC adaptor, cables and the music stand from the F-50.

Then lift the piano while keeping it level, and move it with care, so that you do not drop it on your feet, or get your hands caught.

When Disassembling

Disassemble the unit by carrying out assembly Steps 1-5 in reverse order.

7