|
| Doc. No. | REV. | |
| HTC Corporation. |
|
|
|
| Issued Date | 2008/12/29 | AX02 | |
| . |
|
| |
| Revised Date | 2009/01/14 | ||
|
| |||
|
|
| ||
|
|
|
|
|
Doc. Title | Sapphire Service Manual | Page | 11 of 91 | |
zInstall the SD card
If you need more storage for your device, you can install an SD card into the slot on the upper part of the device. To install the SD card, gently insert the card into the slot (with its gold contacts facing down) until it snaps in place.
To remove the SD card, make sure that no application is accessing the card. Press the card to pop it out slightly and gently pull the card out of the slot.
zCharge the battery
New batteries are shipped partially charged. Before you start using your device, you have to install and charge the battery. Some batteries perform best after several full charge/discharge cycles. You can charge the battery in two ways:
•Connect your device directly to an electrical outlet using the AC adapter.
•Plug the sync cable to the USB port on your PC and to the sync connector on your device.
When your device is turned off, charging is indicated by a solid amber light on the LED indicator.
When your device is turned on, charging is indicated by a solid amber light on the LED
indicator as well as a charging icon (
) on the Today screen.
After the battery has been fully charged, the LED indicator becomes green and a full battery icon
( 
) appears on the Today screen.
HTC CONFIDENTIAL
