HTC SM-TP008-1125 Main unit inspection, HTC Corporation, Sapphire Service Manual, Accept Criteria

						Doc. No.	DOC-00051810		REV.
			HTC Corporation.
						Issued Date	2008/12/29		AX02
			.
						Revised Date	2009/01/14
Doc. Title			Sapphire Service Manual			Page	61 of 91
5.3 Main unit inspection
GAP & STEP INSPECTIONS
			Description		Accept Criteria
	1.	Gap between ME parts.			≦ 1.5 (mm)
	2.	Stylus			Stylus assembly protruding, loose, missing, falling and
					deformed is not allowed.
	3.	Others, refer to production			Others, refer to production release spec
		release spec
OTHERS
					Scratch
	Description				Accept Criteria
	Class A		Exposure of substrate do not accept					MI
			Scratch : L≦4mm ,W≦0.2mm ,N≦2, S≧10mm
	Class C				Label area don’t care			MI
			Exposure of substrate do not accept
			Scratch : L≦10mm ,W≦0.4mm ,N≦5, S≧5mm
			Contamination dot/Granule dot/Cave granule
	Description				Accept Criteria
	Class A		D≦0.5mm ,N≦2,S ≧15 mm (Ignored if D D≦ 0.15mm)					MI
	Class C			D<0.9mm ,N≦4,S ≧10 mm				MI
					Burr
	Description				Accept Criteria
	Burr.			Don’t accept hand scrape				MI
					Imprint mark
	Description				Accept Criteria
	Class A		0.25≦diameter≦0.65mm ,N≦3					MI
					Bright mark
	Description				Accept Criteria
	Class A		L≦2.5mm,W≦0.25mm,N≦3					MI
	Class C			L≦3.0mm,W≦0.3mm,N≦5				MI
					Lint
	Description				Accept Criteria
	Class A		L≦3mm , W≦0.2mm ,N≦2, S ≧5 mm					MI
	Class C		L≦10mm , W≦0.3 mm ,N≦3					MI

HTC CONFIDENTIAL

SM-TP008-1125