English

GENERAL SAFETY RULES

WARNING!

Read all instructions

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1)Work area

a)Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust of fumes.

c)Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2)Electrical safety

a)Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock

3)Personal safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

Use of these devices can reduce dust related hazards.

4)Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from intended could result in a hazardous situation.

5)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

PRECAUTION

Keep children and infirm persons away.

When not in use, tools should be stored out of reach of children and infirm persons.

8

Page 9
Image 9
Huawei WR 22SA manual General Safety Rules, Read all instructions, Do not expose power tools to rain or wet conditions

WR 22SA specifications

The Huawei WR 22SA is a versatile and advanced wireless router designed to meet the growing demands of modern households and small offices seeking reliable connectivity. With an emphasis on delivering high-speed internet and seamless user experiences, the WR 22SA incorporates several cutting-edge features and technologies.

One of the standout characteristics of the Huawei WR 22SA is its dual-band Wi-Fi capability. Operating on both 2.4GHz and 5GHz bands, it allows users to enjoy faster speeds and enhance connectivity reliability. The 2.4GHz band is ideal for tasks like web browsing and streaming, while the 5GHz band significantly reduces interference, making it perfect for activities such as online gaming and HD video streaming.

In addition to its dual-band functionality, the WR 22SA employs advanced MIMO (Multiple Input Multiple Output) technology. This innovation optimizes signal transmission and reception by utilizing multiple antennas to enhance performance. As a result, users can experience improved data rates, coverage, and overall network efficiency, with fewer dead zones throughout their premises.

The router also features robust security protocols, including WPA3 encryption, which provides enhanced protection against unauthorized access and potential cyber threats. This is particularly important in today’s increasingly interconnected world, where security is a top priority for many users.

Furthermore, the Huawei WR 22SA is equipped with intelligent Quality of Service (QoS) features that prioritize bandwidth based on activity. By identifying the types of content being accessed, the router can allocate resources effectively, ensuring that high-priority tasks like video conferencing or online gaming receive the necessary bandwidth for optimal performance.

The installation process is user-friendly; it often involves a simple plug-and-play approach, supported by Huawei's intuitive mobile app. This application allows users to easily manage their network settings, monitor device connections, and even set parental controls, making it a family-friendly option.

With its sleek design and compact form factor, the Huawei WR 22SA not only promises impressive performance but also offers aesthetic appeal, fitting well into any environment. Overall, the Huawei WR 22SA is an excellent choice for users looking for a secure, high-performance wireless solution, capable of handling the demands of multiple devices and applications simultaneously.