Operating Basics

Wireless communication LED

The LED indicates the status of the wireless communication functions.

LED status

Indication

 

 

LED off

Wireless communication switch is set to off.

 

 

LED glows

Wireless communication switch is on.

If you used the Task Bar to disable W-LAN, restart the computer or follow the procedures below to enable the system to recognize W-LAN. Open or click the following: start, Control Panel, System, Hardware Device Manager, Network adapters, TOSHIBA Wireless LAN Mini PCI Card and enable.

TV-Out

Use this jack to connect to a television. Be sure to use a 4 pin type S-video cable.

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer.

Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

Clean the computer using a slightly damp (with water) cloth. You can use glass cleaner on the display. Spray a small amount of cleaner on a soft, clean cloth and wipe the screen gently with the cloth.

Never spray cleaner directly onto the computer or let liquid run into any part of it. Never use harsh or caustic chemical products to clean the computer.

Satellite A30 Series

4-18

Page 80
Image 80
Toshiba A30 user manual TV-Out, Cleaning the computer, Wireless communication LED, LED status Indication