Toshiba A30 Connecting the AC adaptor

Getting Started
Satellite A30 Series 3-5
Satellite A30 Series Version 1 Last Saved on 12/08/2003 14:15
ENGLISH using Euro_M.dot –– Printed on 12/08/2003 as IM_A30EN
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want
to operate from AC power. It is also the fastest way to get started,
because the battery pack will need to be charged before you can operate
from battery power. The AC adaptor can be connected to any power
source supplying from 100 to 240 volts and 50 or 60 hertz. For details on
using the AC adaptor to charge the battery pack, refer to Chapter 6,
Power and Power-Up Modes.
Use of the wrong adaptor could damage your computer. TOSHIBA
assumes no liability for any damage in such case. Please use the bundled
adaptor.
1. Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
Handling the AC adaptor cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or other
reproductive harm. Wash your hands after handling.
2. Connect the AC adaptor to the DC output plug to the DC IN input port
on the back of the computer.
Connecting the adaptor to the computer