User's Manual
Satellite A30 Series xiii
Satellite A30 Series Version 1 Last Saved on 13/08/2003 10:33
ENGLISH using Euro_M.dot –– Printed on 13/08/2003 as IM_A30EN
LCD Display Small bright dots may appear on your TFT display when you turn on your
PC. Your display contains an extremely large number of thin-
filmtransistors (TFT) and is manufactured using high-precision technology.
Any small bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.
Central Processing Unit (“CPU”) Performance Disclaimer: CPU performance in your computer product may vary from specifications
under the following conditions:
■ use of certain external peripheral products use of battery power
instead of AC power
■ use of certain multimedia games or videos with special effects
■ use of standard telephone lines or low speed network connections
■ use of complex modelling software, suc h as high end computer aided
design applications
■ use of computer in area s with low air pressure (high altitude > 1,000
meters or > 3,280 feet above sea level)
■ use of computer at temperatures outside the range of 5ºC to 30ºC
(41ºF to 96ºF) or > 25ºC (77ºF) at high altitude (all temperature
references are approximate).
CPU performance may also vary from specifications due to design
configuration.
Under some conditions, your computer product may automatically
shut-down. This is a normal protective feature designed to reduce the risk
of lost data or damage to the product when used outside recommended
conditions. To avoid risk of lost data, always make back-up copies of
data by periodically storing it on an external storage medium. For
optimum performance, use your computer product only under
recommended conditions. Read additional restrictions in your bundled
documents.
Contact TOSHIBA Technical Service and Support for more information.
CE compliance This product and the original options are designed to observe the related
EMC (Electromagnetic compatibility) and safety standards. However,
TOSHIBA should not guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected
or implemented. In this case the persons who have connected /
implemented those options / cables have to assure that the system
(PC plus options / cables) still fulfils the required standards. To avoid in
general EMC problems following advice should be observed:
■ Only CE marked options should be connected / implemented
■ Only best shielded cables should be connected