Power and Power-Up Modes

Installing the battery pack

To install a battery pack, follow the steps below.

The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements.

1.Turn the computer’s power off.

2.Disconnect all cables connected to the computer.

3.Hold the battery pack so that the label faces down and the connectors on the battery face the connectors on the computer.

4.Gently press the battery into the battery bay until the latch clicks into place.

Installing the battery pack

Satellite A30 Series

6-13

Page 102
Image 102
Toshiba A30 user manual Installing the battery pack