| Pub. |
Model | Page: 8 of 15 |
Second InternalDIPSwitch(SW1) Settings
SW1 is unused. Leave all switches open to aid in future compatibility.
Rotary Switch andJumper Settings
The 2xx/3xx Address (P2) shorting clip selects part of the base input/output address used by the MCU when accessing the VNA.
The Board Address (SW3) rotary switch selects part of the base input/output port address used by the MCU when accessing the VNA.
The Board Identification (SW2) rotary switch lets the MCU distinguish between multiple VNAs installed in the same card rack.
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr.